You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
55 lines
28 KiB
Plaintext
55 lines
28 KiB
Plaintext
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1718872103323 ""}
|
|
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1718872103324 ""}
|
|
{ "Info" "IMPP_MPP_USER_DEVICE" "agi_fpga EP4CE6F17C8 " "Selected device EP4CE6F17C8 for design \"agi_fpga\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1718872103358 ""}
|
|
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1718872103418 ""}
|
|
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1718872103419 ""}
|
|
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1718872103788 ""}
|
|
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1718872103816 ""}
|
|
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE10F17C8 " "Device EP4CE10F17C8 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1718872104372 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE15F17C8 " "Device EP4CE15F17C8 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1718872104372 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE22F17C8 " "Device EP4CE22F17C8 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1718872104372 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1718872104372 ""}
|
|
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "4 " "Fitter converted 4 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_ASDO_DATA1~ C1 " "Pin ~ALTERA_ASDO_DATA1~ is reserved at location C1" { } { { "d:/intelfpga_lite/18.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "d:/intelfpga_lite/18.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_ASDO_DATA1~ } } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 7273 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1718872104407 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_FLASH_nCE_nCSO~ D2 " "Pin ~ALTERA_FLASH_nCE_nCSO~ is reserved at location D2" { } { { "d:/intelfpga_lite/18.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "d:/intelfpga_lite/18.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_FLASH_nCE_nCSO~ } } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 7275 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1718872104407 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_DCLK~ H1 " "Pin ~ALTERA_DCLK~ is reserved at location H1" { } { { "d:/intelfpga_lite/18.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "d:/intelfpga_lite/18.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_DCLK~ } } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 7277 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1718872104407 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_DATA0~ H2 " "Pin ~ALTERA_DATA0~ is reserved at location H2" { } { { "d:/intelfpga_lite/18.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "d:/intelfpga_lite/18.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_DATA0~ } } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 7279 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1718872104407 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1718872104407 ""}
|
|
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1718872104415 ""}
|
|
{ "Info" "IFSAC_FSAC_RAM_METASTABILITY_INFO" "" "Design uses memory blocks. Violating setup or hold times of memory block address registers for either read or write operations could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." { } { } 0 176045 "Design uses memory blocks. Violating setup or hold times of memory block address registers for either read or write operations could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." 0 0 "Fitter" 0 -1 1718872104452 ""}
|
|
{ "Warning" "WTDB_ANALYZE_COMB_LATCHES" "1 " "The Timing Analyzer is analyzing 1 combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." { } { } 0 335093 "The Timing Analyzer is analyzing %1!d! combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." 0 0 "Fitter" 0 -1 1718872105345 ""}
|
|
{ "Info" "ISTA_SDC_STATEMENT_PARENT" "" "Evaluating HDL-embedded SDC commands" { { "Info" "ISTA_SDC_STATEMENT_ENTITY" "sld_hub " "Entity sld_hub" { { "Info" "ISTA_SDC_STATEMENT_EVAL" "create_clock -name altera_reserved_tck \[get_ports \{altera_reserved_tck\}\] -period 10MHz " "create_clock -name altera_reserved_tck \[get_ports \{altera_reserved_tck\}\] -period 10MHz " { } { } 0 332166 "%1!s!" 0 0 "Design Software" 0 -1 1718872105348 ""} { "Info" "ISTA_SDC_STATEMENT_EVAL" "set_clock_groups -asynchronous -group \{altera_reserved_tck\} " "set_clock_groups -asynchronous -group \{altera_reserved_tck\}" { } { } 0 332166 "%1!s!" 0 0 "Design Software" 0 -1 1718872105348 ""} } { } 0 332165 "Entity %1!s!" 0 0 "Design Software" 0 -1 1718872105348 ""} } { } 0 332164 "Evaluating HDL-embedded SDC commands" 0 0 "Fitter" 0 -1 1718872105348 ""}
|
|
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "agi_fpga.sdc " "Synopsys Design Constraints File file not found: 'agi_fpga.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1718872105371 ""}
|
|
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "sys_clk " "Node: sys_clk was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Register circuit_arb:circuit_arb_inst\|clock_circuit:clock_circuit_inst\|timer:timer_inst\|cnt_day\[0\] sys_clk " "Register circuit_arb:circuit_arb_inst\|clock_circuit:clock_circuit_inst\|timer:timer_inst\|cnt_day\[0\] is being clocked by sys_clk" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1718872105381 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Fitter" 0 -1 1718872105381 "|stark_machine|sys_clk"}
|
|
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "byte_num\[0\] " "Node: byte_num\[0\] was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Latch circuit_arb:circuit_arb_inst\|beep_circuit:beep_circuit_inst\|freq_select:freq_select_inst\|note\[1\] byte_num\[0\] " "Latch circuit_arb:circuit_arb_inst\|beep_circuit:beep_circuit_inst\|freq_select:freq_select_inst\|note\[1\] is being clocked by byte_num\[0\]" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1718872105382 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Fitter" 0 -1 1718872105382 "|stark_machine|byte_num[0]"}
|
|
{ "Critical Warning" "WSTA_NO_UNCERTAINTY_WAS_SET_PARENT" "" "The following clock transfers have no clock uncertainty assignment. For more accurate results, apply clock uncertainty assignments or use the derive_clock_uncertainty command." { { "Critical Warning" "WSTA_NO_UNCERTAINTY_WAS_SET_CHILD" "altera_reserved_tck (Rise) altera_reserved_tck (Rise) setup and hold " "From altera_reserved_tck (Rise) to altera_reserved_tck (Rise) (setup and hold)" { } { } 1 332169 "From %1!s! to %2!s! (%3!s!)" 0 0 "Design Software" 0 -1 1718872105404 ""} { "Critical Warning" "WSTA_NO_UNCERTAINTY_WAS_SET_CHILD" "altera_reserved_tck (Rise) altera_reserved_tck (Fall) setup and hold " "From altera_reserved_tck (Rise) to altera_reserved_tck (Fall) (setup and hold)" { } { } 1 332169 "From %1!s! to %2!s! (%3!s!)" 0 0 "Design Software" 0 -1 1718872105404 ""} } { } 1 332168 "The following clock transfers have no clock uncertainty assignment. For more accurate results, apply clock uncertainty assignments or use the derive_clock_uncertainty command." 0 0 "Fitter" 0 -1 1718872105404 ""}
|
|
{ "Info" "ISTA_USER_TDC_OPTIMIZATION_GOALS" "" "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" { } { } 0 332129 "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" 0 0 "Fitter" 0 -1 1718872105404 ""}
|
|
{ "Info" "ISTA_REPORT_CLOCKS_INFO" "Found 1 clocks " "Found 1 clocks" { { "Info" "ISTA_REPORT_CLOCKS_INFO" " Period Clock Name " " Period Clock Name" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1718872105404 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" "======== ============ " "======== ============" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1718872105404 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" " 100.000 altera_reserved_tck " " 100.000 altera_reserved_tck" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1718872105404 ""} } { } 0 332111 "%1!s!" 0 0 "Fitter" 0 -1 1718872105404 ""}
|
|
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "sys_clk~input (placed in PIN E1 (CLK1, DIFFCLK_0n)) " "Automatically promoted node sys_clk~input (placed in PIN E1 (CLK1, DIFFCLK_0n))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G2 " "Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G2" { } { } 0 176355 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "Design Software" 0 -1 1718872105612 ""} } { { "../rtl/stark_machine.v" "" { Text "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/rtl/stark_machine.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 7260 14177 15141 0 0 "" 0 "" "" } } } } } 0 176353 "Automatically promoted node %1!s! %2!s!" 0 0 "Fitter" 0 -1 1718872105612 ""}
|
|
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "altera_internal_jtag~TCKUTAP " "Automatically promoted node altera_internal_jtag~TCKUTAP " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Automatically promoted destinations to use location or clock signal Global Clock" { } { } 0 176355 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "Design Software" 0 -1 1718872105612 ""} } { { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 3407 14177 15141 0 0 "" 0 "" "" } } } } } 0 176353 "Automatically promoted node %1!s! %2!s!" 0 0 "Fitter" 0 -1 1718872105612 ""}
|
|
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "sys_rst_n~input (placed in PIN E15 (CLK4, DIFFCLK_2p)) " "Automatically promoted node sys_rst_n~input (placed in PIN E15 (CLK4, DIFFCLK_2p))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G9 " "Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G9" { } { } 0 176355 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "Design Software" 0 -1 1718872105612 ""} } { { "../rtl/stark_machine.v" "" { Text "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/rtl/stark_machine.v" 3 0 0 } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 7261 14177 15141 0 0 "" 0 "" "" } } } } } 0 176353 "Automatically promoted node %1!s! %2!s!" 0 0 "Fitter" 0 -1 1718872105612 ""}
|
|
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "sld_signaltap:auto_signaltap_0\|sld_signaltap_impl:sld_signaltap_body\|sld_signaltap_implb:sld_signaltap_body\|reset_all " "Automatically promoted node sld_signaltap:auto_signaltap_0\|sld_signaltap_impl:sld_signaltap_body\|sld_signaltap_implb:sld_signaltap_body\|reset_all " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Automatically promoted destinations to use location or clock signal Global Clock" { } { } 0 176355 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "Design Software" 0 -1 1718872105612 ""} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "sld_signaltap:auto_signaltap_0\|sld_signaltap_impl:sld_signaltap_body\|sld_signaltap_implb:sld_signaltap_body\|sld_buffer_manager:sld_buffer_manager_inst\|last_buffer_write_address_sig\[0\]~0 " "Destination node sld_signaltap:auto_signaltap_0\|sld_signaltap_impl:sld_signaltap_body\|sld_signaltap_implb:sld_signaltap_body\|sld_buffer_manager:sld_buffer_manager_inst\|last_buffer_write_address_sig\[0\]~0" { } { { "sld_buffer_manager.vhd" "" { Text "d:/intelfpga_lite/18.1/quartus/libraries/megafunctions/sld_buffer_manager.vhd" 356 -1 0 } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 5647 14177 15141 0 0 "" 0 "" "" } } } } } 0 176357 "Destination node %1!s!" 0 0 "Design Software" 0 -1 1718872105612 ""} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "sld_signaltap:auto_signaltap_0\|sld_signaltap_impl:sld_signaltap_body\|sld_signaltap_implb:sld_signaltap_body\|sld_offload_buffer_mgr:\\stp_non_zero_depth_offload_gen:stp_offload_buff_mgr_inst\|acq_buf_read_reset~0 " "Destination node sld_signaltap:auto_signaltap_0\|sld_signaltap_impl:sld_signaltap_body\|sld_signaltap_implb:sld_signaltap_body\|sld_offload_buffer_mgr:\\stp_non_zero_depth_offload_gen:stp_offload_buff_mgr_inst\|acq_buf_read_reset~0" { } { { "sld_buffer_manager.vhd" "" { Text "d:/intelfpga_lite/18.1/quartus/libraries/megafunctions/sld_buffer_manager.vhd" 638 -1 0 } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 5671 14177 15141 0 0 "" 0 "" "" } } } } } 0 176357 "Destination node %1!s!" 0 0 "Design Software" 0 -1 1718872105612 ""} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "sld_signaltap:auto_signaltap_0\|sld_signaltap_impl:sld_signaltap_body\|sld_signaltap_implb:sld_signaltap_body\|sld_offload_buffer_mgr:\\stp_non_zero_depth_offload_gen:stp_offload_buff_mgr_inst\|acq_buf_read_reset " "Destination node sld_signaltap:auto_signaltap_0\|sld_signaltap_impl:sld_signaltap_body\|sld_signaltap_implb:sld_signaltap_body\|sld_offload_buffer_mgr:\\stp_non_zero_depth_offload_gen:stp_offload_buff_mgr_inst\|acq_buf_read_reset" { } { { "sld_buffer_manager.vhd" "" { Text "d:/intelfpga_lite/18.1/quartus/libraries/megafunctions/sld_buffer_manager.vhd" 638 -1 0 } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 4013 14177 15141 0 0 "" 0 "" "" } } } } } 0 176357 "Destination node %1!s!" 0 0 "Design Software" 0 -1 1718872105612 ""} } { } 0 176356 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0 "Design Software" 0 -1 1718872105612 ""} } { { "sld_signaltap_impl.vhd" "" { Text "d:/intelfpga_lite/18.1/quartus/libraries/megafunctions/sld_signaltap_impl.vhd" 882 -1 0 } } { "temporary_test_loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 0 { 0 ""} 0 4776 14177 15141 0 0 "" 0 "" "" } } } } } 0 176353 "Automatically promoted node %1!s! %2!s!" 0 0 "Fitter" 0 -1 1718872105612 ""}
|
|
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1718872106340 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1718872106344 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1718872106345 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1718872106352 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1718872106361 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1718872106369 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1718872106369 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1718872106373 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1718872106493 ""}
|
|
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1718872106498 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1718872106498 ""}
|
|
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:02 " "Fitter preparation operations ending: elapsed time is 00:00:02" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1718872106610 ""}
|
|
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1718872106632 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1718872107578 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:01 " "Fitter placement preparation operations ending: elapsed time is 00:00:01" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1718872108443 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1718872108488 ""}
|
|
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1718872109378 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:01 " "Fitter placement operations ending: elapsed time is 00:00:01" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1718872109378 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1718872109995 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "4 " "Router estimated average interconnect usage is 4% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "8 X11_Y12 X22_Y24 " "Router estimated peak interconnect usage is 8% of the available device resources in the region that extends from location X11_Y12 to location X22_Y24" { } { { "loc" "" { Generic "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/" { { 1 { 0 "Router estimated peak interconnect usage is 8% of the available device resources in the region that extends from location X11_Y12 to location X22_Y24"} { { 12 { 0 ""} 11 12 12 13 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1718872111157 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1718872111157 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1718872111338 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1718872111338 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1718872111338 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1718872111341 ""}
|
|
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.52 " "Total time spent on timing analysis during the Fitter is 0.52 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1718872111520 ""}
|
|
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1718872111544 ""}
|
|
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1718872111923 ""}
|
|
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1718872111924 ""}
|
|
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1718872112456 ""}
|
|
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:02 " "Fitter post-fit operations ending: elapsed time is 00:00:02" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1718872113193 ""}
|
|
{ "Warning" "WCPT_FLEXLM_ERROR_MSG" "Invalid (inconsistent) license key. The license key and data for the feature do not match. This usually happens when a license file has been altered. Feature: quartus_seu_mitigation License path: D:\\intelFPGA_lite\\license.dat; FlexNet Licensing error:-8,523 For further information, refer to the FlexNet Licensing documentation, available at \"www.flexerasoftware.com\". " "FLEXlm software error: Invalid (inconsistent) license key. The license key and data for the feature do not match. This usually happens when a license file has been altered. Feature: quartus_seu_mitigation License path: D:\\intelFPGA_lite\\license.dat; FlexNet Licensing error:-8,523 For further information, refer to the FlexNet Licensing documentation, available at \"www.flexerasoftware.com\".." { } { } 0 292000 "FLEXlm software error: %1!s!." 0 0 "Fitter" 0 -1 1718872113701 ""}
|
|
{ "Warning" "WCPT_FLEXLM_ERROR_MSG" "Invalid (inconsistent) license key. The license key and data for the feature do not match. This usually happens when a license file has been altered. Feature: quartus_seu_mitigation License path: D:\\intelFPGA_lite\\license.dat; FlexNet Licensing error:-8,523 For further information, refer to the FlexNet Licensing documentation, available at \"www.flexerasoftware.com\". " "FLEXlm software error: Invalid (inconsistent) license key. The license key and data for the feature do not match. This usually happens when a license file has been altered. Feature: quartus_seu_mitigation License path: D:\\intelFPGA_lite\\license.dat; FlexNet Licensing error:-8,523 For further information, refer to the FlexNet Licensing documentation, available at \"www.flexerasoftware.com\".." { } { } 0 292000 "FLEXlm software error: %1!s!." 0 0 "Fitter" 0 -1 1718872113711 ""}
|
|
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/output_files/agi_fpga.fit.smsg " "Generated suppressed messages file C:/Users/Stark-lin/Desktop/agi_fpga/hardware/prj/output_files/agi_fpga.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1718872113755 ""}
|
|
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 12 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 12 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "5519 " "Peak virtual memory: 5519 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1718872115100 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jun 20 16:28:35 2024 " "Processing ended: Thu Jun 20 16:28:35 2024" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1718872115100 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:15 " "Elapsed time: 00:00:15" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1718872115100 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:07 " "Total CPU time (on all processors): 00:00:07" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1718872115100 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1718872115100 ""}
|