add 4399

README.md

@@ -1,12 +1,14 @@
 # gesture
 
 #### 介绍
-FPGA手势识别项目
+FPGA 4399手势黄金矿工
 
-#### 软件架构
+#### 硬件架构
 FPGA+Paj7620u2
 通信：i2c
-
+#### 软件架构
+go按键模拟
+4399黄金矿工游戏
 
 #### 使用说明
 

rtl/ges_recognize.v

@@ -4,7 +4,8 @@ module ges_recognize(
     
     output  wire        scl        ,
     inout   wire        sda        ,
-    output  wire [3: 0] led
+    output  wire [3: 0] led        ,
+    output  wire        tx 
 );
 wire [2: 0]     step        ;
 wire [5: 0]     cfg_num     ;
@@ -13,6 +14,11 @@ wire            cfg_start   ;
 wire            i2c_clk     ;
 wire            i2c_start   ;
 wire [7: 0]     po_data     ;
+wire            tx_vld      ;
+reg             send_flag   ;
+wire            rx_vld      ;
+
+assign rx_vld = po_data != 8'h00;
 paj7620_cfg paj7620_cfg_inst(
 .i2c_clk        (i2c_clk    ),
 .sys_rst_n      (sys_rst_n  ),
@@ -37,6 +43,16 @@ i2c_ctrl    i2c_ctrl_inst(
 .sda            (sda        ),
 .po_data        (po_data    )
 
+);
+uart_tx     uart_tx_inst(
+.sys_clk        (sys_clk),
+.sys_rst_n      (sys_rst_n),
+.tx_din         (po_data),//并行输入，接受模块传入
+.rx_vld         (rx_vld),//接受模块，串转并有效信号
+
+
+.tx_vld         (tx_vld),
+.tx_dout        (tx)//串行输出
 );
 led_ctrl    led_ctrl_inst(
 .sys_clk        (sys_clk    ),

rtl/ges_recognize.v.bak

@@ -0,0 +1,64 @@
+module ges_recognize(
+    input   wire        sys_clk    ,
+    input   wire        sys_rst_n  ,
+    
+    output  wire        scl        ,
+    inout   wire        sda        ,
+    output  wire [3: 0] led        ,
+    output  wire        tx 
+);
+wire [2: 0]     step        ;
+wire [5: 0]     cfg_num     ;
+wire [15: 0]    cfg_data    ;
+wire            cfg_start   ;
+wire            i2c_clk     ;
+wire            i2c_start   ;
+wire [7: 0]     po_data     ;
+wire            tx_vld      ;
+reg             send_flag   ;
+wire            rx_vld      ;
+
+assign rx_vld == po_data != 8'h00;
+paj7620_cfg paj7620_cfg_inst(
+.i2c_clk        (i2c_clk    ),
+.sys_rst_n      (sys_rst_n  ),
+.cfg_start      (cfg_start  ),
+.step           (step       ),
+
+.cfg_num        (cfg_num    ),
+.cfg_data       (cfg_data   ),
+.i2c_start      (i2c_start  )
+);
+i2c_ctrl    i2c_ctrl_inst(
+.sys_clk        (sys_clk    ),
+.sys_rst_n      (sys_rst_n  ),
+.i2c_start      (i2c_start  ),
+.cfg_num        (cfg_num    ),
+.cfg_data       (cfg_data   ),
+
+.cfg_start      (cfg_start  ),
+.step           (step       ),
+.i2c_clk        (i2c_clk    ),
+.scl            (scl        ),
+.sda            (sda        ),
+.po_data        (po_data    )
+
+);
+uart_tx     uart_tx_inst(
+.sys_clk        (sys_clk),
+.sys_rst_n      (sys_rst_n),
+.tx_din         (po_data),//并行输入，接受模块传入
+.rx_vld         (rx_vld),//接受模块，串转并有效信号
+
+
+.tx_vld         (tx_vld),
+.tx_dout        (tx)//串行输出
+);
+led_ctrl    led_ctrl_inst(
+.sys_clk        (sys_clk    ),
+.sys_rst_n      (sys_rst_n  ),
+.po_data        (po_data    ),
+          
+.led            (led        )
+);
+endmodule

rtl/i2c_ctrl.v

@@ -748,7 +748,7 @@ always @(posedge i2c_clk or negedge sys_rst_n)begin
         po_data <= recv_data;
     end  
     else begin
-        po_data <= po_data;
+        po_data <= 8'h0;
     end 
 end 
 endmodule

rtl/param.v

@@ -0,0 +1,16 @@
+`define SYS_FRQ 50_000_000
+`define BAUD_115200
+//9600、19200、38400、57600以及115200
+`ifdef BAUD_9600
+    `define MAX 9600
+`elsif BAUD_19200
+    `define MAX 19200
+`elsif BAUD_38400
+    `define MAX 38400
+`elsif BAUD_57600
+    `define MAX 57600
+`elsif BAUD_115200
+    `define MAX 115200
+`else
+    `define MAX 115200
+`endif

rtl/uart_rx.v

@@ -0,0 +1,108 @@
+`include "param.v"
+module uart_rx(
+    input   wire        sys_clk     ,
+    input   wire        sys_rst_n   ,
+    input   wire        rx_din      ,//数据串行输入
+    input   wire        rcv_start   ,
+
+    output  wire [7: 0] rx_dout     ,//数据并行输出
+    output  wire        rx_vld      //输出信号有效
+);
+parameter BAUD = `SYS_FRQ / `MAX;//获取1bit时钟振动的次数
+reg din_reg0;//同步外来信号，和本时钟域同步
+reg din_reg1;//打拍，获取下降沿
+wire nedge;//下降沿标志
+
+reg rx_flag;//开始接受标志
+
+//对bit进行计数寄存器
+reg [3: 0] cnt_bit    ;
+wire       add_cnt_bit;
+wire       end_cnt_bit;
+//对波特率进行计数寄存器
+reg [12: 0] cnt_bps     ;
+wire        add_cnt_bps ;
+wire        end_cnt_bps ; 
+
+//数据寄存器
+reg [7: 0]  data_reg;
+always @(posedge sys_clk or negedge sys_rst_n) begin
+    if(!sys_rst_n)begin
+        din_reg0 <= 1'b1;
+        din_reg1 <= 1'b1;
+    end
+    else begin
+        din_reg0 <= rx_din;
+        din_reg1 <= din_reg0;
+    end 
+end
+assign nedge = ~din_reg0 && din_reg1;//下降沿
+
+//rx_flag信号约束
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        rx_flag <= 1'b0;
+    end 
+    else if(nedge && rcv_start)begin//检测到下降沿
+        rx_flag <= 1'b1;
+    end 
+    else if(end_cnt_bit)begin//传输完成标志
+        rx_flag <= 1'b0;
+    end
+    else begin
+        rx_flag <= rx_flag;//其他时刻保持
+    end  
+end 
+//cnt_bps计数器设计
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        cnt_bps <= 13'd0;
+    end 
+    else if(add_cnt_bps)begin
+        if(end_cnt_bps)begin
+            cnt_bps <= 13'd0;
+        end 
+        else begin
+            cnt_bps <= cnt_bps + 1'd1;
+        end 
+    end 
+    else begin
+        cnt_bps <= cnt_bps;
+    end 
+end 
+assign add_cnt_bps = rx_flag;
+assign end_cnt_bps = add_cnt_bps && cnt_bps == BAUD - 1'd1;
+//cnt_bit计数器设计
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        cnt_bit <= 4'd0;
+    end 
+    else if(add_cnt_bit)begin
+        if(end_cnt_bit)begin
+            cnt_bit <= 4'd0;
+        end 
+        else begin
+            cnt_bit <= cnt_bit + 1'd1;
+        end 
+    end 
+    else begin
+        cnt_bit <= cnt_bit;
+    end 
+end 
+assign add_cnt_bit = end_cnt_bps;//比特计数开始条件
+assign end_cnt_bit = add_cnt_bit && cnt_bit == 4'd8;//0-8
+//对data_reg进行约束
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        data_reg <= 8'hx;
+    end 
+    else if((cnt_bit >= 4'd1 && cnt_bit <= 4'd8) && (cnt_bps == BAUD >> 1))begin
+        data_reg[cnt_bit - 1'd1] = din_reg0;//对输入数据进行采样
+    end 
+    else begin
+        data_reg <= data_reg;
+    end
+end 
+assign rx_dout = data_reg;//数据输出
+assign rx_vld = end_cnt_bit;//串转并结束标志
+endmodule 

rtl/uart_top.v

@@ -0,0 +1,85 @@
+module uart_top(
+    input   wire         sys_clk    ,
+    input   wire         sys_rst_n  ,
+    input   wire         rx         ,
+
+    output  wire         tx         ,
+    output  wire         led_ready    
+);
+wire [7: 0] data_byte   ;
+wire [7: 0] data_out    ;
+wire        ready       ;
+wire        comm_finish ;
+wire        tx_vld      ;
+wire        rx_vld      ;
+reg         rcv_start   ;
+
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        rcv_start <= 1'b1;
+    end 
+    else if(ready)begin
+        rcv_start <= 1'b0;
+    end 
+    else if(comm_finish)begin
+        rcv_start <= 1'b1;
+    end 
+    else begin
+        rcv_start <= rcv_start;
+    end 
+end 
+uart_rx     uart_rx_inst(
+.sys_clk        (sys_clk)   ,
+.sys_rst_n      (sys_rst_n) ,
+.rx_din         (rx)        ,//数据串行输入
+.rcv_start      (rcv_start) ,   
+
+.rx_dout        (data_byte) ,//数据并行输出
+.rx_vld         (rx_vld)    //输出信号有效
+);
+
+
+
+uart_tx     uart_tx_inst(
+.sys_clk        (sys_clk)   ,
+.sys_rst_n      (sys_rst_n) ,
+.tx_din         (data_out)  ,//并行输入，接受模块传入
+.rx_vld         (rx_vld)    ,//接受模块，串转并有效信
+.tx_vld         (tx_vld)    ,  
+
+.tx_dout        (tx)//串行输出
+);
+
+device_ready device_ready_inst(
+.sys_clk        (sys_clk)   ,
+.sys_rst_n      (sys_rst_n) ,
+.data_in        (data_byte) ,
+.rx_vld         (rx_vld)    ,
+
+.ready          (ready)   
+);
+
+
+
+command_send command_send_inst(
+.sys_clk        (sys_clk)    ,
+.sys_rst_n      (sys_rst_n)  ,
+.tx_vld         (tx_vld)     ,
+    
+.comm_finish    (comm_finish),
+.data_out       (data_out)
+);
+
+led_driver led_driver_inst(
+.sys_clk        (sys_clk),
+.sys_rst_n      (sys_rst_n),
+.rx_data        (data_byte),
+    
+.led_ready      (led_ready)
+);
+
+
+
+
+
+endmodule

rtl/uart_tx.v

@@ -0,0 +1,104 @@
+`include "param.v"
+module uart_tx(
+    input   wire            sys_clk     ,
+    input   wire            sys_rst_n   ,
+    input   wire  [7: 0]    tx_din      ,//并行输入，接受模块传入
+    input   wire            rx_vld      ,//接受模块，串转并有效信号
+
+
+    output  wire            tx_vld      ,
+    output  reg             tx_dout     //串行输出
+);
+parameter BAUD = `SYS_FRQ / `MAX;//波特率最大数
+reg [8: 0] data_reg;//寄存数据，包含起始位
+reg        tx_flag ;//发送数据有效信号
+//波特率计数寄存器
+reg [12: 0] cnt_bps;
+wire        add_cnt_bps;
+wire        end_cnt_bps;
+
+//比特计数寄存器
+reg [3: 0] cnt_bit;
+wire       add_cnt_bit;
+wire       end_cnt_bit;
+
+//寄存数据
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        data_reg <= 9'hx;
+    end 
+    else if(rx_vld)begin
+        data_reg <= {tx_din, 1'b0};//封装成数据帧
+    end
+    else begin
+        data_reg <= data_reg;
+    end 
+end 
+//tx_flag信号约束
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        tx_flag <= 1'b0;
+    end 
+    else if(rx_vld)begin
+        tx_flag <= 1'b1;
+    end 
+    else if(end_cnt_bit)begin
+        tx_flag <= 1'b0;
+    end 
+    else begin
+        tx_flag <= tx_flag;
+    end 
+end 
+//cnt_bps计数器设计
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        cnt_bps <= 13'd0;
+    end 
+    else if(add_cnt_bps)begin
+        if(end_cnt_bps)begin
+            cnt_bps <= 13'd0;
+        end 
+        else begin
+            cnt_bps <= cnt_bps + 1'd1;
+        end 
+    end 
+    else begin
+        cnt_bps <= cnt_bps;
+    end 
+end 
+assign add_cnt_bps = tx_flag;
+assign end_cnt_bps = add_cnt_bps && cnt_bps == BAUD - 1'd1;
+//cnt_bit计数器设计
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        cnt_bit <= 4'd0;
+    end 
+    else if(add_cnt_bit)begin
+        if(end_cnt_bit)begin
+            cnt_bit <= 4'd0;
+        end 
+        else begin
+            cnt_bit <= cnt_bit + 1'd1;
+        end 
+    end 
+    else begin
+        cnt_bit <= cnt_bit;
+    end     
+end 
+assign add_cnt_bit = end_cnt_bps;//波特计数器结束开启
+assign end_cnt_bit = add_cnt_bit && cnt_bit == 4'd8;
+
+//tx_dout信号进行约束
+always @(posedge sys_clk or negedge sys_rst_n)begin
+    if(!sys_rst_n)begin
+        tx_dout <= 1'b1;
+    end 
+    else if(tx_flag)begin
+        tx_dout <= data_reg[cnt_bit];//发送数据，并转串
+    end 
+    else begin
+        tx_dout <= 1'b1;
+    end 
+end 
+assign tx_vld = end_cnt_bit;
+endmodule

software/go.mod

@@ -0,0 +1,33 @@
+module software
+
+go 1.22.2
+
+require (
+	github.com/StackExchange/wmi v1.2.1
+	github.com/go-vgo/robotgo v0.110.1
+	github.com/tarm/serial v0.0.0-20180830185346-98f6abe2eb07
+)
+
+require (
+	github.com/gen2brain/shm v0.0.0-20230802011745-f2460f5984f7 // indirect
+	github.com/go-ole/go-ole v1.3.0 // indirect
+	github.com/jezek/xgb v1.1.0 // indirect
+	github.com/kbinani/screenshot v0.0.0-20230812210009-b87d31814237 // indirect
+	github.com/lufia/plan9stats v0.0.0-20230326075908-cb1d2100619a // indirect
+	github.com/lxn/win v0.0.0-20210218163916-a377121e959e // indirect
+	github.com/otiai10/gosseract v2.2.1+incompatible // indirect
+	github.com/power-devops/perfstat v0.0.0-20221212215047-62379fc7944b // indirect
+	github.com/robotn/xgb v0.0.0-20190912153532-2cb92d044934 // indirect
+	github.com/robotn/xgbutil v0.0.0-20190912154524-c861d6f87770 // indirect
+	github.com/shirou/gopsutil/v3 v3.23.8 // indirect
+	github.com/shoenig/go-m1cpu v0.1.6 // indirect
+	github.com/tklauser/go-sysconf v0.3.12 // indirect
+	github.com/tklauser/numcpus v0.6.1 // indirect
+	github.com/vcaesar/gops v0.30.2 // indirect
+	github.com/vcaesar/imgo v0.40.0 // indirect
+	github.com/vcaesar/keycode v0.10.1 // indirect
+	github.com/vcaesar/tt v0.20.0 // indirect
+	github.com/yusufpapurcu/wmi v1.2.3 // indirect
+	golang.org/x/image v0.12.0 // indirect
+	golang.org/x/sys v0.12.0 // indirect
+)

software/go.sum

@@ -0,0 +1,116 @@
+github.com/BurntSushi/freetype-go v0.0.0-20160129220410-b763ddbfe298/go.mod h1:D+QujdIlUNfa0igpNMk6UIvlb6C252URs4yupRUV4lQ=
+github.com/BurntSushi/graphics-go v0.0.0-20160129215708-b43f31a4a966/go.mod h1:Mid70uvE93zn9wgF92A/r5ixgnvX8Lh68fxp9KQBaI0=
+github.com/StackExchange/wmi v1.2.1 h1:VIkavFPXSjcnS+O8yTq7NI32k0R5Aj+v39y29VYDOSA=
+github.com/StackExchange/wmi v1.2.1/go.mod h1:rcmrprowKIVzvc+NUiLncP2uuArMWLCbu9SBzvHz7e8=
+github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
+github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/gen2brain/shm v0.0.0-20230802011745-f2460f5984f7 h1:VLEKvjGJYAMCXw0/32r9io61tEXnMWDRxMk+peyRVFc=
+github.com/gen2brain/shm v0.0.0-20230802011745-f2460f5984f7/go.mod h1:uF6rMu/1nvu+5DpiRLwusA6xB8zlkNoGzKn8lmYONUo=
+github.com/go-ole/go-ole v1.2.5/go.mod h1:pprOEPIfldk/42T2oK7lQ4v4JSDwmV0As9GaiUsvbm0=
+github.com/go-ole/go-ole v1.2.6/go.mod h1:pprOEPIfldk/42T2oK7lQ4v4JSDwmV0As9GaiUsvbm0=
+github.com/go-ole/go-ole v1.3.0 h1:Dt6ye7+vXGIKZ7Xtk4s6/xVdGDQynvom7xCFEdWr6uE=
+github.com/go-ole/go-ole v1.3.0/go.mod h1:5LS6F96DhAwUc7C+1HLexzMXY1xGRSryjyPPKW6zv78=
+github.com/go-vgo/robotgo v0.110.1 h1:2etpOzsBBt9KJOxDBFBVYzE4/U7gRrsnB9dxuujRMTw=
+github.com/go-vgo/robotgo v0.110.1/go.mod h1:DdJUdi6mEU8ttHMbow6hKD1TjgsfgJC/H+4dusok8Uw=
+github.com/google/go-cmp v0.5.6/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
+github.com/google/go-cmp v0.5.9 h1:O2Tfq5qg4qc4AmwVlvv0oLiVAGB7enBSJ2x2DqQFi38=
+github.com/google/go-cmp v0.5.9/go.mod h1:17dUlkBOakJ0+DkrSSNjCkIjxS6bF9zb3elmeNGIjoY=
+github.com/jezek/xgb v1.1.0 h1:wnpxJzP1+rkbGclEkmwpVFQWpuE2PUGNUzP8SbfFobk=
+github.com/jezek/xgb v1.1.0/go.mod h1:nrhwO0FX/enq75I7Y7G8iN1ubpSGZEiA3v9e9GyRFlk=
+github.com/kbinani/screenshot v0.0.0-20230812210009-b87d31814237 h1:YOp8St+CM/AQ9Vp4XYm4272E77MptJDHkwypQHIRl9Q=
+github.com/kbinani/screenshot v0.0.0-20230812210009-b87d31814237/go.mod h1:e7qQlOY68wOz4b82D7n+DdaptZAi+SHW0+yKiWZzEYE=
+github.com/lufia/plan9stats v0.0.0-20211012122336-39d0f177ccd0/go.mod h1:zJYVVT2jmtg6P3p1VtQj7WsuWi/y4VnjVBn7F8KPB3I=
+github.com/lufia/plan9stats v0.0.0-20230326075908-cb1d2100619a h1:N9zuLhTvBSRt0gWSiJswwQ2HqDmtX/ZCDJURnKUt1Ik=
+github.com/lufia/plan9stats v0.0.0-20230326075908-cb1d2100619a/go.mod h1:JKx41uQRwqlTZabZc+kILPrO/3jlKnQ2Z8b7YiVw5cE=
+github.com/lxn/win v0.0.0-20210218163916-a377121e959e h1:H+t6A/QJMbhCSEH5rAuRxh+CtW96g0Or0Fxa9IKr4uc=
+github.com/lxn/win v0.0.0-20210218163916-a377121e959e/go.mod h1:KxxjdtRkfNoYDCUP5ryK7XJJNTnpC8atvtmTheChOtk=
+github.com/otiai10/gosseract v2.2.1+incompatible h1:Ry5ltVdpdp4LAa2bMjsSJH34XHVOV7XMi41HtzL8X2I=
+github.com/otiai10/gosseract v2.2.1+incompatible/go.mod h1:XrzWItCzCpFRZ35n3YtVTgq5bLAhFIkascoRo8G32QE=
+github.com/otiai10/mint v1.3.0 h1:Ady6MKVezQwHBkGzLFbrsywyp09Ah7rkmfjV3Bcr5uc=
+github.com/otiai10/mint v1.3.0/go.mod h1:F5AjcsTsWUqX+Na9fpHb52P8pcRX2CI6A3ctIT91xUo=
+github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
+github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
+github.com/power-devops/perfstat v0.0.0-20210106213030-5aafc221ea8c/go.mod h1:OmDBASR4679mdNQnz2pUhc2G8CO2JrUAVFDRBDP/hJE=
+github.com/power-devops/perfstat v0.0.0-20221212215047-62379fc7944b h1:0LFwY6Q3gMACTjAbMZBjXAqTOzOwFaj2Ld6cjeQ7Rig=
+github.com/power-devops/perfstat v0.0.0-20221212215047-62379fc7944b/go.mod h1:OmDBASR4679mdNQnz2pUhc2G8CO2JrUAVFDRBDP/hJE=
+github.com/robotn/xgb v0.0.0-20190912153532-2cb92d044934 h1:2lhSR8N3T6I30q096DT7/5AKEIcf1vvnnWAmS0wfnNY=
+github.com/robotn/xgb v0.0.0-20190912153532-2cb92d044934/go.mod h1:SxQhJskUJ4rleVU44YvnrdvxQr0tKy5SRSigBrCgyyQ=
+github.com/robotn/xgbutil v0.0.0-20190912154524-c861d6f87770 h1:2uX8QRLkkxn2EpAQ6I3KhA79BkdRZfvugJUzJadiJwk=
+github.com/robotn/xgbutil v0.0.0-20190912154524-c861d6f87770/go.mod h1:svkDXUDQjUiWzLrA0OZgHc4lbOts3C+uRfP6/yjwYnU=
+github.com/shirou/gopsutil/v3 v3.23.8 h1:xnATPiybo6GgdRoC4YoGnxXZFRc3dqQTGi73oLvvBrE=
+github.com/shirou/gopsutil/v3 v3.23.8/go.mod h1:7hmCaBn+2ZwaZOr6jmPBZDfawwMGuo1id3C6aM8EDqQ=
+github.com/shoenig/go-m1cpu v0.1.6 h1:nxdKQNcEB6vzgA2E2bvzKIYRuNj7XNJ4S/aRSwKzFtM=
+github.com/shoenig/go-m1cpu v0.1.6/go.mod h1:1JJMcUBvfNwpq05QDQVAnx3gUHr9IYF7GNg9SUEw2VQ=
+github.com/shoenig/test v0.6.4 h1:kVTaSd7WLz5WZ2IaoM0RSzRsUD+m8wRR+5qvntpn4LU=
+github.com/shoenig/test v0.6.4/go.mod h1:byHiCGXqrVaflBLAMq/srcZIHynQPQgeyvkvXnjqq0k=
+github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
+github.com/stretchr/objx v0.4.0/go.mod h1:YvHI0jy2hoMjB+UWwv71VJQ9isScKT/TqJzVSSt89Yw=
+github.com/stretchr/objx v0.5.0/go.mod h1:Yh+to48EsGEfYuaHDzXPcE3xhTkx73EhmCGUpEOglKo=
+github.com/stretchr/testify v1.7.1/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
+github.com/stretchr/testify v1.8.0/go.mod h1:yNjHg4UonilssWZ8iaSj1OCr/vHnekPRkoO+kdMU+MU=
+github.com/stretchr/testify v1.8.4 h1:CcVxjf3Q8PM0mHUKJCdn+eZZtm5yQwehR5yeSVQQcUk=
+github.com/stretchr/testify v1.8.4/go.mod h1:sz/lmYIOXD/1dqDmKjjqLyZ2RngseejIcXlSw2iwfAo=
+github.com/tarm/serial v0.0.0-20180830185346-98f6abe2eb07 h1:UyzmZLoiDWMRywV4DUYb9Fbt8uiOSooupjTq10vpvnU=
+github.com/tarm/serial v0.0.0-20180830185346-98f6abe2eb07/go.mod h1:kDXzergiv9cbyO7IOYJZWg1U88JhDg3PB6klq9Hg2pA=
+github.com/tklauser/go-sysconf v0.3.12 h1:0QaGUFOdQaIVdPgfITYzaTegZvdCjmYO52cSFAEVmqU=
+github.com/tklauser/go-sysconf v0.3.12/go.mod h1:Ho14jnntGE1fpdOqQEEaiKRpvIavV0hSfmBq8nJbHYI=
+github.com/tklauser/numcpus v0.6.1 h1:ng9scYS7az0Bk4OZLvrNXNSAO2Pxr1XXRAPyjhIx+Fk=
+github.com/tklauser/numcpus v0.6.1/go.mod h1:1XfjsgE2zo8GVw7POkMbHENHzVg3GzmoZ9fESEdAacY=
+github.com/vcaesar/gops v0.30.2 h1:fANyUGCjLkfcYmJRVnXv+QZhT8cL2e0GWpRFZe58p/4=
+github.com/vcaesar/gops v0.30.2/go.mod h1:2NSA2Q9M1irGnGD9tWdo0Z+MwKjUj4Q4EgUDukN/Vsk=
+github.com/vcaesar/imgo v0.40.0 h1:okI1eonRAfGLzjqgTIBkUwhm4j/rH19qGno4eFOBQsc=
+github.com/vcaesar/imgo v0.40.0/go.mod h1:E5uI53XkEfbI20VvcIZ/19G2hHidPfH9h4NtQooEY+8=
+github.com/vcaesar/keycode v0.10.1 h1:0DesGmMAPWpYTCYddOFiCMKCDKgNnwiQa2QXindVUHw=
+github.com/vcaesar/keycode v0.10.1/go.mod h1:JNlY7xbKsh+LAGfY2j4M3znVrGEm5W1R8s/Uv6BJcfQ=
+github.com/vcaesar/tt v0.20.0 h1:9t2Ycb9RNHcP0WgQgIaRKJBB+FrRdejuaL6uWIHuoBA=
+github.com/vcaesar/tt v0.20.0/go.mod h1:GHPxQYhn+7OgKakRusH7KJ0M5MhywoeLb8Fcffs/Gtg=
+github.com/yuin/goldmark v1.4.13/go.mod h1:6yULJ656Px+3vBD8DxQVa3kxgyrAnzto9xy5taEt/CY=
+github.com/yusufpapurcu/wmi v1.2.3 h1:E1ctvB7uKFMOJw3fdOW32DwGE9I7t++CRUEMKvFoFiw=
+github.com/yusufpapurcu/wmi v1.2.3/go.mod h1:SBZ9tNy3G9/m5Oi98Zks0QjeHVDvuK0qfxQmPyzfmi0=
+golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
+golang.org/x/crypto v0.0.0-20210921155107-089bfa567519/go.mod h1:GvvjBRRGRdwPK5ydBHafDWAxML/pGHZbMvKqRZ5+Abc=
+golang.org/x/image v0.12.0 h1:w13vZbU4o5rKOFFR8y7M+c4A5jXDC0uXTdHYRP8X2DQ=
+golang.org/x/image v0.12.0/go.mod h1:Lu90jvHG7GfemOIcldsh9A2hS01ocl6oNO7ype5mEnk=
+golang.org/x/mod v0.6.0-dev.0.20220419223038-86c51ed26bb4/go.mod h1:jJ57K6gSWd91VN4djpZkiMVwK6gcyfeH4XE8wZrZaV4=
+golang.org/x/mod v0.8.0/go.mod h1:iBbtSCu2XBx23ZKBPSOrRkjjQPZFPuis4dIYUhu/chs=
+golang.org/x/net v0.0.0-20190620200207-3b0461eec859/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
+golang.org/x/net v0.0.0-20210226172049-e18ecbb05110/go.mod h1:m0MpNAwzfU5UDzcl9v0D8zg8gWTRqZa9RBIspLL5mdg=
+golang.org/x/net v0.0.0-20220722155237-a158d28d115b/go.mod h1:XRhObCWvk6IyKnWLug+ECip1KBveYUHfp+8e9klMJ9c=
+golang.org/x/net v0.6.0 h1:L4ZwwTvKW9gr0ZMS1yrHD9GZhIuVjOBBnaKH+SPQK0Q=
+golang.org/x/net v0.6.0/go.mod h1:2Tu9+aMcznHK/AK1HMvgo6xiTLG5rD5rZLDS+rp2Bjs=
+golang.org/x/sync v0.0.0-20190423024810-112230192c58/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
+golang.org/x/sync v0.0.0-20220722155255-886fb9371eb4/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
+golang.org/x/sync v0.1.0/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
+golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
+golang.org/x/sys v0.0.0-20190916202348-b4ddaad3f8a3/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20201018230417-eeed37f84f13/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20201119102817-f84b799fce68/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20201204225414-ed752295db88/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20210615035016-665e8c7367d1/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.0.0-20220520151302-bc2c85ada10a/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.0.0-20220722155257-8c9f86f7a55f/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.1.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.5.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.8.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.11.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.12.0 h1:CM0HF96J0hcLAwsHPJZjfdNzs0gftsLfgKt57wWHJ0o=
+golang.org/x/sys v0.12.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/term v0.0.0-20201126162022-7de9c90e9dd1/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
+golang.org/x/term v0.0.0-20210927222741-03fcf44c2211/go.mod h1:jbD1KX2456YbFQfuXm/mYQcufACuNUgVhRMnK/tPxf8=
+golang.org/x/term v0.5.0/go.mod h1:jMB1sMXY+tzblOD4FWmEbocvup2/aLOaQEp7JmGp78k=
+golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
+golang.org/x/text v0.3.3/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
+golang.org/x/text v0.3.7/go.mod h1:u+2+/6zg+i71rQMx5EYifcz6MCKuco9NR6JIITiCfzQ=
+golang.org/x/text v0.7.0/go.mod h1:mrYo+phRRbMaCq/xk9113O4dZlRixOauAjOtrjsXDZ8=
+golang.org/x/text v0.13.0/go.mod h1:TvPlkZtksWOMsz7fbANvkp4WM8x/WCo/om8BMLbz+aE=
+golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
+golang.org/x/tools v0.0.0-20191119224855-298f0cb1881e/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
+golang.org/x/tools v0.1.12/go.mod h1:hNGJHUnrk76NpqgfD5Aqm5Crs+Hm0VOH/i9J2+nxYbc=
+golang.org/x/tools v0.6.0/go.mod h1:Xwgl3UAJ/d3gWutnCtw505GrjyAbvKui8lOU390QaIU=
+golang.org/x/xerrors v0.0.0-20190717185122-a985d3407aa7/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
+golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
+gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
+gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
+gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
+gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=

software/main.go

@@ -0,0 +1,67 @@
+package main
+
+import (
+	"fmt"
+	"log"
+	"time"
+
+	"github.com/StackExchange/wmi"
+	"github.com/go-vgo/robotgo"
+	"github.com/tarm/serial"
+)
+
+type Win32_PnPEntity struct {
+	Name string
+}
+
+func check() string {
+	var devices []Win32_PnPEntity
+	query := `SELECT Name FROM Win32_PnPEntity WHERE Name LIKE '%(COM%'`
+
+	err := wmi.Query(query, &devices)
+	if err != nil {
+		panic(fmt.Sprintf("Failed to query WMI: %v", err))
+	}
+
+	return devices[0].Name[40:44]
+}
+func main() {
+	// 串口配置
+	com := check()
+	config := &serial.Config{
+		Name: com,    // 替换为实际的串口设备路径（例如，在Windows上可能是"COM1"）
+		Baud: 115200, // 波特率，根据实际需求设置
+	}
+
+	// 打开串口
+	port, err := serial.OpenPort(config)
+	if err != nil {
+		log.Fatal(err)
+	}
+	defer port.Close()
+
+	buffer := make([]byte, 128) // 缓冲区大小根据你的数据包大小调整
+
+	for {
+		n, err := port.Read(buffer)
+		if err != nil {
+			log.Printf("读取错误: %v\n", err)
+			continue
+		}
+
+		if n > 0 {
+			log.Printf("读取到 %d 字节数据: %d\n", n, buffer[:n])
+			// 这里可以添加处理数据的逻辑
+			if buffer[0] == 0x02 {
+				robotgo.Click("left")
+			}
+
+		} else {
+			// 当没有读取到数据时，可以根据需要处理或简单跳过
+			// log.Println("没有新数据")
+		}
+
+		// 可以根据需要添加适当的延迟，避免无数据时CPU占用过高
+		time.Sleep(10 * time.Millisecond)
+	}
+}

software/winres/winres.json

@@ -0,0 +1,60 @@
+{
+  "RT_GROUP_ICON": {
+    "APP": {
+      "0000": [
+        "home-logo.png"
+      ]
+    }
+  },
+  "RT_MANIFEST": {
+    "#1": {
+      "0409": {
+        "identity": {
+          "name": "",
+          "version": ""
+        },
+        "description": "",
+        "minimum-os": "win7",
+        "execution-level": "as invoker",
+        "ui-access": false,
+        "auto-elevate": false,
+        "dpi-awareness": "system",
+        "disable-theming": false,
+        "disable-window-filtering": false,
+        "high-resolution-scrolling-aware": false,
+        "ultra-high-resolution-scrolling-aware": false,
+        "long-path-aware": false,
+        "printer-driver-isolation": false,
+        "gdi-scaling": false,
+        "segment-heap": false,
+        "use-common-controls-v6": false
+      }
+    }
+  },
+  "RT_VERSION": {
+    "#1": {
+      "0000": {
+        "fixed": {
+          "file_version": "0.0.0.0",
+          "product_version": "0.0.0.0"
+        },
+        "info": {
+          "0409": {
+            "Comments": "",
+            "CompanyName": "",
+            "FileDescription": "",
+            "FileVersion": "",
+            "InternalName": "",
+            "LegalCopyright": "",
+            "LegalTrademarks": "",
+            "OriginalFilename": "",
+            "PrivateBuild": "",
+            "ProductName": "",
+            "ProductVersion": "",
+            "SpecialBuild": ""
+          }
+        }
+      }
+    }
+  }
+}